ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag Disarming and Arming|Page 6186 > < Air Bag Disarming and Arming|Page 6184
Page 19
background image

3

Install the pin-type retainers.

30. Connect the electrical connector to the switch in the lower steering column opening finish panel.

31. Install the lower steering column opening finish panel to the instrument panel.

1

Position the lower steering column opening finish panel to the instrument panel and push in, seating the retaining clips.

2

Install the screws.

32. Connect the battery ground cable.
33. With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS).  See: Prove Out Procedure

WARNING:  THE RESTRAINT SYSTEM DIAGNOSTIC TOOL IS FOR RESTRAINT SYSTEM SERVICE ONLY. REMOVE FROM
VEHICLE PRIOR TO ROAD USE. FAILURE TO REMOVE COULD RESULT IN INJURY AND POSSIBLE VIOLATION OF
VEHICLE SAFETY STANDARDS.

34. Check the active restraint system for correct operation.

Air Bag Disarming and Arming|Page 6186 > < Air Bag Disarming and Arming|Page 6184