Thunderbird V8-3.9L VIN A (2002)
Wheel Hub: Service and Repair
Front
Wheel Bearing and Hub
Removal and Installation
CAUTION: Suspension fasteners are critical parts because they affect the performance of vital components and systems and their failure can result in
major service expense. A new part with the same part number must be installed if installation becomes necessary. Do not use a new part of lesser
quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct retention of these parts.
1. Remove the wheel and tire assembly.
2. Remove the brake disc.
3. Remove the pushpins.
4. Move the inner fender skirt aside and disconnect the anti-lock brake (ABS) sensor.
5. Detach the ABS sensor wire from the retainers.