Thunderbird V8-302 5.0L HO (1992)
Wiper Motor: Service and Repair
Fig. 6 Wiper Motor Replacement
1.
Disconnect battery ground cable.
2.
With wipers in Park position, remove arm and blade assemblies.
3.
Remove LH cowl vent screen.
4.
Remove vacuum manifolds from wiper module, Fig. 6.
5.
Disconnect wiring connectors, then remove five bolts and one nut from wiper module and remove module.
6.
Remove crankpin clip, then disconnect linkage drive arm from motor crankpin.
7.
Remove three motor attaching screws, pull motor from opening.
8.
Reverse procedure to install, ensuring that wiper motor is in the park position prior to installation.
