Front Wheel Alignment (at curb weight) — Caster
| Model | Decimal Degrees | Degrees and Minutes |
| | Nominal | Tolerance Range | Nominal | Tolerance Range |
| All variants | +1.80° | +2.30° to +1.30° | +1°48' | +2°18' to +1°18' |
Maximum variance left-hand side to right-hand side Caster 1.00° (1°00')
Front Wheel Alignment (at curb weight) — Camber
| Model | Decimal Degrees | Degrees and Minutes |
| | Nominal | Tolerance Range | Nominal | Tolerance Range |
| Short wheelbase van | -0.61° | -0.11° to -1.11° | -0°37' | -0°07' to -1°07' |
| Short wheelbase kombi | -0.70° | -0.20° to -1.20° | -0°42' | -0°12' to -1°12' |
| Long wheelbase van | -0.52° | -0.02° to -1.02° | -0°31' | -0°01' to -1°01' |
| Long wheelbase kombi | -0.61° | -0.11° to -1.11° | -0°37' | -0°07' to -1°07' |
Maximum variance left-hand side to right-hand side Camber 0.50° (0°30')
Front Wheel Alignment (at curb weight) — Total Toe Setting - Short Wheelbase Van
| Derivative | Tolerance Range | Setting Adjustment, If Required |
| All variants (decimal degrees) | 0.22° (Toe-in) ± 0.15° | - |
| All variants (degrees and minutes) | 0°13' (Toe-in) ± 0°09' | - |
| All variants (mm) | 1.5 (Toe-in) ± 1.0 | - |
Front Wheel Alignment (at curb weight) — Total Toe Setting - Short Wheelbase Kombi
| Derivative | Tolerance Range | Setting Adjustment, If Required |
| All variants (decimal degrees) | 0.17° (Toe-in) ± 0.15° | - |
| All variants (degrees and minutes) | 0°10' (Toe-in) ± 0°09' | - |
| All variants (mm) | 1.1 (Toe-in) ± 1.0 | - |
Front Wheel Alignment (at curb weight) — Total Toe Setting – Long Wheelbase Van
| Derivative | Tolerance Range | Setting Adjustment, If Required |
| All variants (decimal degrees) | 0.50° (Toe-in) ± 0.15° | - |
| All variants (degrees and minutes) | 0°30' (Toe-in) ± 0°09' | - |
| All variants (mm) | 3.3 (Toe-in) ± 1.0 | - |
Front Wheel Alignment (at curb weight) — Total Toe Setting – Long Wheelbase Kombi
| Derivative | Tolerance Range | Setting Adjustment, If Required |
| All variants (decimal degrees) | 0.43° (Toe-in) ± 0.15° | - |
| All variants (degrees and minutes) | 0°26' (Toe-in) ± 0°09' | - |
| All variants (mm) | 2.9 (Toe-in) ± 1.0 | - |
Rear Wheel Alignment (at curb weight) — Camber
| Model | Decimal Degrees | Degrees and Minutes |
| | Nominal | Tolerance Range | Nominal | Tolerance Range |
| All variants | -1.00° | -0.50° to -1.50° | -1°00' | -0°30' to -1°30' |
Maximum variance left-hand side to right-hand side Camber 0.50° (0° 30')
Rear Wheel Alignment (at curb weight) — Total Toe Setting
| Derivative | Tolerance Range | Setting Adjustment, If Required |
| All variants (decimal degrees) | 0 Toe to 0.60° (Toe-in) | - |
| All variants (degrees and minutes) | 0 Toe to 0°36' (Toe-in) | - |
| All variants (mm) | 0 Toe to 4.0 (Toe-in) | - |
Torque Specifications
| Description | Nm | lb-ft | lb-in |
| Tie-rod end locknut | 47 | 35 | - |
