General Procedures Adjustment | -
Raise the parking brake control to its highest position. | | -
Raise and support the vehicle. For additional information, refer to: Lifting (100-02 Jacking and Lifting, Description and Operation). | | -
Settle the parking brake cable in five stages. - Stage 1: Remove the parking brake cable adjustment nut lock nut.
- Stage 2: Tighten the parking brake cable adjustment nut to 8 Nm.
- Stage 3: Loosen the parking brake cable adjustment nut to the end of the thread.
- Stage 4: Carry out stages 2 and 3 a further three times.
- Stage 1: Raise the parking brake control to its highest position.
| | -
Release the parking brake. | | -
Tighten the parking brake adjustment nut until a slight drag is felt at the rear wheels. | | -
Loosen the parking brake cable adjustment nut three turns. | | -
Rotate the rear wheels to make sure that no drag is felt. | | -
Install the parking brake cable adjustment nut lock nut. | | |