ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Parking Brake Actuator > < Parking Brake Module
Parking Brake and Actuation - Vehicles With: Parking Brake Assist - Parking Brake Wheel Speed Sensor Transit 2000.5 (01/2000-05/2006)
Removal and Installation

Removal

  1. Disconnect the parking brake wheel speed sensor electrical connector.
  1. Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.

  1. Detach the parking brake wheel speed sensor wiring harness from the inner fender.

  1. Remove the parking brake wheel speed sensor.

Installation

  1. NOTE:
    NOTE:Make sure the wheel knuckle wheel speed sensor mounting is clean and free from foreign material.
    To install, reverse the removal procedure.

Parking Brake Actuator > < Parking Brake Module