Removal and Installation Removal | -
Disconnect the power steering line from the power steering pump. - Allow the fluid to drain into a suitable container.
| | -
Disconnect the power steering line from the power steering gear. - Remove the bolt.
- Rotate the clamp plate.
- Detach the lines from the front axle crossmember.
- Allow the fluid to drain into a suitable container.
| | -
Remove the power steering pump to steering gear pressure line. | Installation | -
Install a new power steering line to power steering pump union. | | -
CAUTION:Make sure the power steering line is correctly located in the valve body. Connect the power steering line to the power steering gear. - Rotate the clamp plate.
- Install the bolt.
- Attach the lines to the front axle crossmember.
| | -
Connect the power steering line to the power steering pump. | | |