Ford Workshop Service and Repair Manuals

Clamping Tool, Boot Retaining Clamp

204-169 (14-044)

1. Remove the tie-rod end.
   For additional information, refer to Tie-Rod End in this section.
   

2. Remove the steering gear boot.
   • Discard the inner clamp.

1. Install the steering gear boot and outer clamp.
   1. Install the boot.
   2. Install the outer clamp.

2. Using the special tool, install a new inner steering gear boot clamp.

3. Install the tie-rod end.
   For additional information, refer to Tie-Rod End in this section.