ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
3 Powertrain > < Steering Column Multifunction Switch

Transit 2000.5 (01.2000-05.2006)

Steering Column Switches - Ignition Switch Transit 2000.5 (01/2000-05/2006)
Removal and Installation

Removal

  1. Disconnect the battery ground cable. For additional information, refer to Section  414-01 Battery, Mounting and Cables.

  1. Remove the steering column upper shroud.
    1. Using a thin bladed screwdriver, release the two clips (one each side).
    1. Remove the shroud.

  1. Remove the steering column lower shroud.

  1. Disconnect the ignition switch electrical connector.
    1. Depress the locking tang.
    1. Disconnect the ignition switch electrical connector.

  1. Remove the ignition switch.
    1. Depress the locking tangs.
    1. Remove the ignition switch.

Installation

  1. To install, reverse the removal procedure.

3 Powertrain > < Steering Column Multifunction Switch