Removal and Installation 3/8 inch square drive breaker bar Removal | -
Slide open the bolt cover. | | -
Remove the accessory drive belt shield retaining bolts. | | -
Detach the fuel charging wiring harness and remove the accessory drive belt shield. | | -
CAUTION:Do not use a 3/8 inch square drive extension bar. Remove the accessory drive belt. - Using a 3/8 inch square drive breaker bar in the hole provided, rotate the accessory drive belt tensioner counterclockwise.
- Remove the accessory drive belt.
| Installation Vehicles without air conditioning | -
CAUTION:Do not use a 3/8 inch square drive extension bar. NOTE:Install the accessory drive belt on the accessory drive belt idler pulley last. Install the accessory drive belt. - Using a 3/8 inch square drive breaker bar in the hole provided, rotate the accessory drive belt tensioner counterclockwise.
- Install the accessory drive belt.
| Vehicles with air conditioning | -
CAUTION:Do not use a 3/8 inch square drive extension bar. NOTE:Install the accessory drive belt on the accessory drive belt idler pulley last. Install the accessory drive belt. - Using a 3/8 inch square drive breaker bar in the hole provided, rotate the accessory drive belt tensioner counterclockwise.
- Install the accessory drive belt.
| All vehicles | -
Loosely install the accessory drive belt shield and attach the fuel charging wiring harness. | | -
Install the accessory drive belt shield retaining bolts. | |