Removal and Installation Removal | -
Disconnect the battery ground cable. For additional information, refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures). | | -
Remove the exhaust gas recirculation valve (EGR). For additional information, refer to: Exhaust Gas Recirculation (EGR) Valve - 2.4L Duratorq-TDCi (Puma) Diesel (303-08 Engine Emission Control, Removal and Installation). | | -
Detach the camshaft position sensor (CMP) from the intake manifold. | | -
Remove the intake manifold. | | -
Disconnect the glow plug electrical connector. | | -
Remove the retaining bolt from the glow plug wire terminal block. | | -
CAUTION:Using a suitable lint free material cover the intake ports for each cylinder to prevent debris entering the engine. Disconnect the glow plug electrical connectors and remove the glow plug wire. | Installation | -
To install, reverse the removal procedure. | | |