ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
308-02A Clutch Controls - Vehicles With: MT-75|Specifications > < Clutch Master Cylinder

Transit 2000.5 (01.2000-05.2006)

Clutch Controls - Vehicles With: MT-75 - Clutch Slave Cylinder Transit 2000.5 (01/2000-05/2006)
Removal and Installation

Removal

  1. Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.

  1. Disconnect the supply hose from the clutch slave cylinder.
    • Remove the clip.
    • Allow the fluid to drain into a suitable container.

  1. Remove the clutch slave cylinder.

Installation
  1. NOTE:
    NOTE:Make sure that the clutch slave cylinder actuating rod correctly engages with the clutch release lever.
    Install the clutch slave cylinder.

  1. Connect the supply hose to the clutch slave cylinder.
    • Install the clip.
  1. Bleed the clutch system. For additional information, refer to Section  308-00 Manual Transmission/Transaxle and Clutch - General Information.

308-02A Clutch Controls - Vehicles With: MT-75|Specifications > < Clutch Master Cylinder