Ford Transit Workshop Service and Auto Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Refrigeration Low-Pressure Cutoff Switch >
< Refrigeration Condenser Core - Vehicles Without: Charge Air Cooler
Removal and Installation of Refrigeration High-Pressure Cutoff Switch
Mechanical Repairs
4 Electrical / 412 Climate Control System
412-05 Refrigeration
Description and Operation
Diagnosis and Testing
General Procedures
Removal and Installation
Refrigeration High-Pressure Cutoff Switch
Refrigeration - Refrigeration High-Pressure Cutoff Switch
Transit 2000.5 (01/2000-05/2006)
Removal and Installation
Removal
Raise the vehicle. For additional information, refer to SectionÂ
100-02 Jacking and Lifting
.
Disconnect the connector for the refrigeration high-pressure cutoff switch (2.4L diesel engine shown).
CAUTION:
Ensure that the high-pressure cutoff switch valve is completely closed following removal to prevent loss of refrigerant.
Remove the refrigeration high-pressure cutoff switch (2.4L diesel engine shown).
Discard the O-rings.
Installation
NOTE:
Install new O-rings for the refrigeration high-pressure cutoff switch.
NOTE:
Coat the high-pressure cutoff switch O-rings with clean refrigerant oil prior to installation.
Install the components in the reverse order.
Mechanical Repairs
4 Electrical / 412 Climate Control System
412-05 Refrigeration
Description and Operation
Diagnosis and Testing
General Procedures
Removal and Installation
Refrigeration High-Pressure Cutoff Switch
Refrigeration Low-Pressure Cutoff Switch >
< Refrigeration Condenser Core - Vehicles Without: Charge Air Cooler