ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Refrigeration Drier-Filter > < Stationary Refrigeration Compressor

Transit 2000.5 (01.2000-05.2006)

Refrigeration - Stationary Refrigeration Compressor Belt Transit 2000.5 (01/2000-05/2006)
Removal and Installation

Removal

WARNING:
WARNING:The stationary refrigeration system must not be connected to the 230-volt circuit during repair work. Failure to observe this instruction can lead to injury.
  1. Remove the front bench seat. For additional information, refer to Section  501-10 Seating.

  1. Remove the cover for the stationary refrigeration compressor belt.

  1. Loosen the nuts for the stationary refrigeration compressor.

  1. Slacken the stationary refrigeration compressor belt.
    • Turn the drive belt tensioning nut counter clockwise.

  1. Remove the stationary refrigeration compressor belt.

Installation

WARNING:
WARNING:The stationary refrigeration system must not be connected to the 230-volt circuit during repair work. Failure to observe this instruction can lead to injury.
  1. Install the components in the reverse order.

Refrigeration Drier-Filter > < Stationary Refrigeration Compressor