ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Front Door Lock Cylinder > < Exterior Rear Door Handle RH - Van-Kombi-Bus
Handles, Locks, Latches and Entry Systems - Liftgate Release Handle Transit 2000.5 (01/2000-05/2006)
Removal and Installation

Removal

  1. Remove the liftgate trim panel. For additional information, refer to Section  501-05 Interior Trim and Ornamentation.

  1. NOTE:
    NOTE:Do not touch the adhesive surface as re-bonding will be impaired.
    Detach the watershield from the liftgate panel.

  1. Detach the exterior liftgate handle actuating rod.
    • Open the clip and pull out the actuating rod.

  1. Disconnect the licence plate lamp electrical connectors.

  1. Remove the licence plate panel (two nuts each side).

  1. Remove the exterior liftgate handle.
    • With the handle in the opened position rotate it to one side and remove it.

Installation

  1. To install, reverse the removal procedure.

Front Door Lock Cylinder > < Exterior Rear Door Handle RH - Van-Kombi-Bus