Transit Connect L4-2.0L (2010)
Door Lock Cylinder: Removal and Replacement
Door Lock Cylinder - Front
Door Lock Cylinder - Front
1. If equipped with power door locks, remove the Central Junction Box (CJB) fuse 163 (20A) to prevent the Generic Electronic Module (GEM) from
actuating the door locks.
2. Remove the front door trim panel.
3. Position the water shield aside.
4. Remove the 3 bolts and the front door window glass run.
-
To install, tighten to 10 Nm (89 lb-in).
5. Remove the front door lock cylinder retaining clip.