Transit Connect L4-2.0L (2010)
1. NOTE: Do not tighten the service clamp at this time.
Install the service clamp(s).
2. Position the muffler and tailpipe assembly and attach the 3 exhaust hanger isolators.
3. Install a new gasket and 2 new catalytic converter-to-muffler and tailpipe nuts.
-
Tighten to 47 Nm (35 lb-ft).
4. Align the muffler and tailpipe assembly and tighten the service clamp(s).
-
Tighten to 47 Nm (35 lb-ft).
