Transit Connect L4-2.0L (2010)
4. To exit the self-diagnostic mode, press and hold the power button for 10 seconds, until the screen goes blank.
-
The system automatically restarts in normal mode.
In-Dash Computer Software Level Check
1. Turn the in-dash computer on.
2. Press SETTINGS, then SYSTEM, then scroll down and select the VIEW icon next to the ABOUT selection.
3. The following information (relevant to service) is displayed:
4. If needed, the in-dash computer software level can be compared with the latest software level by checking the Ford Work Solutions(TM) consumer
website
.
Internet Connection Manager
1. Turn the in-dash computer on.