Transit Connect L4-2.0L (2010)
Electronic Brake Control Module: Service and Repair
Anti-Lock Brake System (ABS) Module
Removal and Installation
1. Remove the Hydraulic Control Unit (HCU). For additional information, refer to Hydraulic Control Unit (HCU) See: Brakes and Traction
Control/Antilock Brakes / Traction Control Systems/Hydraulic Control Assembly - Antilock Brakes/Service and Repair.
2. Remove the 4 ABS module screws and the ABS module.
-
To install, tighten to 2 Nm (18 lb-in).
3. To install, reverse the removal procedure.