Transit Connect L4-2.0L (2010)
Transmission Speed Sensor: Service and Repair
Output Shaft Speed (OSS) Sensor
Output Shaft Speed (OSS) Sensor
Output Shaft Speed (OSS) Sensor
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Place a drain pan beneath the Output Shaft Speed (OSS) sensor.
3. Remove the OSS sensor.
-
Disconnect the electrical connector.
-
Remove the bolt.
-
Inspect the OSS bore.
4. Inspect the O-ring seal for nicks or cuts; install a new O-ring if necessary.
