Windstar V6-232 3.8L (1995)
Attachment II - Labor and Parts Information
LABOR ALLOWANCES
To reduce overall costs for this repair, the labor times for this program are currently under review for the use of air tools (for disassembly only). These
times may be revised in the future to reflect air tool usage.
PART NUMBER/DESCRIPTION
Parts will not be direct shipped for this program. Order your parts requirements through normal order processing channels.
DEALER PRICE
For latest prices, check or call your:
^
Order Processing Center
^
DOES II
^
Updated Price Book
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.
CLAIMS PREPARATION
^
Enter using DWE.
^
Use code information shown below:
Program Code - 98M01
Labor Operation - See above
See Sections 5 & 6 of the ACESII manual for detailed instructions.
Attachment III - Technical Information
HEAD GASKET REPLACEMENT
AFFECTED VEHICLES:
1994 CONTINENTAL, 1994-95 TAURUS/SABLE AND 1995 WINDSTAR EQUIPPED WITH 3.8L FWD ENGINE
INSPECTION
Verify coolant loss, due to leakage past the head gasket, by performing the cylinder compression test procedure as outlined in Section 03-00 of the