Windstar V6-3.8L VIN 4 (1997)
Head Rest: Service and Repair
1. Raise front seat back head restraint to maximum height stop.
2. With finger, depress the seat upholstery fabric around the sleeve to locate the hairclip under guide sleeve flange.
3. With finger or suitable tool, pull rearmost leg of hairclip rearward while lifting straight up on front seat back head restraint. This will disengage the
last notch on the front seat head rest guide rod sleeve.
4. Repeat for other front seat head rest guide rod sleeve.
5. Lift front seat back head restraint to remove.
6. To install, reverse Removal procedure.