Windstar V6-3.8L VIN 4 (1997)
Power Window Switch: Testing and Inspection
Single Window Switch
1. Use a self-powered test light or an ohmmeter to test the window regulator control switch.
2. With the window regulator control switch in the neutral position, there should be continuity between terminals 1 and 3, 2 and 5, and 4 and 6.
3. With the toggle switch pushed downward, there should be continuity between terminals 2, 4 and 5, and 1 and 3. Terminal 6 should be
disconnected from any other terminal.
4. With the toggle switch pushed upward, there should be continuity between terminals 2, 3 and 5, and 4 and 6. Terminal 1 should be disconnected
from any other terminal.
5. If the window regulator control switch does not test as stated, replace the window regulator control switch.