Sprinter 3500 L5-2.7L DSL Turbo (2004)
RKE/Immobilizer Module
5. Roll the top of the instrument cluster rearward far enough to access and release the latch that secures the RKE/immobilizer module to the back of
the instrument cluster rear cover and disengage the module from the cluster.
Cluster Connectors
6. Depress the release (Arrow A) and lift the lever arm (Arrow B) to disconnect each of the two frame wire harness connectors for the cluster from
the connector receptacles on the back of the cluster housing.
7. Lift the instrument cluster upward far enough to disengage the two molded plastic pivot loops integral to the base of the cluster hood from the two
pairs of molded plastic pivot hooks that are integral to the top of the instrument panel base structure.
8. Remove the instrument cluster from the instrument panel.
INSTALLATION
1. Position the instrument cluster to the instrument panel.
2. Align the two molded plastic pivot loops integral to the base of the cluster hood between the two pairs of molded plastic pivot hooks that are
integral to the top of instrument panel base structure, then push downward on the top of the cluster until the loops snap into engagement with the
hooks.
3. Roll the top of the instrument cluster rearward to access, reconnect, and latch the two frame wire harness connectors for the cluster to the
connector receptacles on the back of the cluster housing.
