geo Workshop Repair Guides

Geo Workshop Service and Repair Manuals

A/T Control Module - Replacement Update|Page 128 > < Air Bag Control Module|Locations
Page 1
background image

Control Module: Technical Service Bulletins
A/T Control Module - Replacement Update

Number: 91-518-7A

Section: 7A

Date: OCT. 1992

Corporate Bulletin No.: 237104

ASE No: A2

Subject:
AUTOMATIC TRANSAXLE CONTROL MODULE (TCM) REPLACEMENT

Model and Year:
1989-91 GEO METRO

SERVICE UPDATE

This bulletin is an amendment to Section 7A of the 1989-91 Geo Metro Service Manuals (ST370-89, ST370-90 and ST370-91 respectively). Refer to
this bulletin for information concerning Transaxle Control Module (TCM) replacement procedures on 1989-91 Geo Metro vehicles equipped with
automatic transaxles.

On-Vehicle Service

Transaxle Control Module (TCM)

Remove or Disconnect

1.

Negative (-) battery cable.

2.

Two electrical connectors from TCM.

3.

Two bolts and TCM from underneath right side of steering column (Figure 1).

Install or Connect

1.

TCM underneath right side of steering column; secure with two bolts (Figure 1).

A/T Control Module - Replacement Update|Page 128 > < Air Bag Control Module|Locations