Prizm L4-1.8L DOHC (1994)
Distributor Igniter Coil Removal
5.
Two screws and the igniter from distributor housing.
INSTALL OR CONNECT
6.
Igniter to distributor housing. Secure with two screws.
7.
Three wires to igniter terminals. Secure with three screws.
8.
Ignition coil dust cover and new gasket to housing.
9.
Rotor to distributor housing.
10.
Distributor to vehicle.
SET
Adjusting Ignition Timing
11.
Ignition timing