Prizm L4-108 1.8L DOHC VIN 8 MFI (1995)
Ignition Control Module: Service and Repair
IGNITER REPLACEMENT
REMOVE OR DISCONNECT
1. Negative (-) battery cable.
2. Remove Air Cleaner (ACL) housing from vehicle.
3. Disconnect igniter electrical connector.
4. Remove two bolts from igniter mounting bracket.
5. Remove two screws and igniter assembly from mounting bracket.
INSTALL OR CONNECT
1. Two screws and igniter assembly to mounting bracket.
2. Mounting bracket to vehicle.
3. Igniter electrical connector.
4. Air cleaner housing to vehicle.
5. Negative (-) battery cable.
