Spectrum L4-91.5 1.5L (1989)
Oil Pan: Service and Repair
Fig. 15 Sealant Application For Oil Pan Installation
1.
Disconnect battery ground cable.
2.
Raise and support vehicle.
3.
Drain engine oil, then disconnect exhaust pipe bracket from block.
4.
Disconnect exhaust pipe from exhaust manifold.
5.
Disconnect righthand tension rod under bumper.
6.
Remove oil pan attaching bolts and the oil pan.
7.
Reverse procedure to install. Ensure pan and cylinder case mating surfaces are clean prior to mounting pan. Apply TB-1207-B or other suitable
sealer to locations indicated in, Fig. 15, prior to oil pan installation.
