Spectrum L4-91.5 1.5L (1989)
Exhaust Manifold: Service and Repair
Fig. 3 Exhaust Manifold Replacement
1.
Disconnect battery ground cable.
2.
Disconnect oxygen sensor electrical connector.
3.
Disconnect TCA flex hose, then remove hot air cover.
4.
Raise and support vehicle.
5.
Disconnect exhaust pipe from exhaust manifold, then lower vehicle.
6.
Remove exhaust manifold attaching nuts and bolts, then the exhaust manifold, Fig. 3.
7.
Reverse procedure to install, noting the following:
a. Using a straight-edge and feeler gauge, check exhaust manifold to cylinder head contact surface for warpage.
b. Exhaust manifold must be replaced if warpage exceeds .0157 inch (0.4 mm).
