Spectrum L4-91.5 1.5L (1989)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
NOTICE: Care must be used when handling coolant temperature sensor. Damage to coolant temperature sensor will affect proper operation of the fuel
injection system.
REMOVAL:
1.
Relieve coolant system pressure.
2.
Remove negative battery cable.
3.
Disconnect electrical connector.
4.
Remove CTS from engine.
INSTALLATION:
1.
Coat thread of CTS with sealer P/N 1052080 or equivalent.
2.
Install CTS, torque to 30 N-m (22 lb. ft.).
3.
Connect electrical connector.
4.
Connect negative battery cable.
5.
Replenish coolant system to proper level.