geo Workshop Repair Guides

Geo Workshop Service and Repair Manuals

Horn Switch|Service and Repair|Page 4972 > < Diagram Information and Instructions|Page 4967
Page 1
background image

Horn Switch: Service and Repair

Fig. 5  SIR Module Removal

Fig. 6  Steering Wheel Removal

Fig. 7  Horn Harness Connector

1.

On all models equipped with the SIR or inflatable restraint systems, disable system as described under MAINTENANCE
PROCEDURES/AIRBAG DEACTIVATION
 before performing any repair procedures on or near steering column.

2.

Disconnect battery ground cable.

3.

Remove SIR module mounting screws and SIR module, Fig. 5.

4.

Remove steering wheel retaining nut.

5.

Using puller tool NO. J 1859-03 or equivalent, remove steering wheel from column, Fig. 6.

6.

Remove horn switch retaining screws and horn switch from steering wheel, Fig. 7.

7.

Remove rear steering wheel cover attaching screws, then the cover.

Horn Switch|Service and Repair|Page 4972 > < Diagram Information and Instructions|Page 4967