geo Workshop Repair Guides

Geo Workshop Service and Repair Manuals

A/T Control Module - Replacement Update|Page 169 > < Brake Pedal - Firmer Pedal Effort When Cold
Page 1
background image

Control Module: All Technical Service Bulletins
A/T Control Module - Replacement Update

Number: 91-519-7A

Section: 7A

Date: OCT. 1992

Corporate Bulletin No.: 237103

ASE No: A2

Subject:
AUTOMATIC TRANSAXLE CONTROL MODULE (TCM) REPLACEMENT

Model and Year:
1990-91 GEO STORM GSI WITH 4-SPEED AUTOMATIC TRANSAXLE

SERVICE UPDATE

This bulletin is an amendment to Section 7A of the 1990-91 Geo Storm Service Manuals ST371-90 and ST370-91. Refer to this bulletin for information
concerning Transaxle Control Module (TCM) replacement procedures on 1990-91 Geo Storm GSi vehicles equipped with the JF403E 4-speed automatic
transaxle.

On-Vehicle Service

Transaxle Control Module (TCM)

Remove or Disconnect

1.

Negative (-) battery cable.

2.

Switch bezel from instrument panel (pry off with a screwdriver or similar tool) and disconnect electrical connectors from switches.

3.

Cigar lighter bezel from instrument panel (pry off with a screwdriver or similar tool) and disconnect cigar lighter electrical connector.

4.

Two screws and hood latch release handle from hood latch release cable and knee bolster.

5.

Five screws, one nut, one bolt and knee bolster from instrument panel (Figure 1).

A/T Control Module - Replacement Update|Page 169 > < Brake Pedal - Firmer Pedal Effort When Cold