geo Workshop Repair Guides

Geo Workshop Service and Repair Manuals

Instrument Panel, Gauges and Warning Indicators > < Cruise Control - (W/Electro Stepper Mtr.) Diagnostics|Page 4296
Page 8
background image

The charts and schematics in this bulletin can be used in place of the diagnostic charts in previous Service Manuals when this new tool is used. These
charts will be included in the 1999 Service Manuals.

Cruise Control Inoperative

Important

To avoid misdiagnosis:

^

Check for proper operation of brake lamps.

^

Check throttle linkage for mechanical binding which could cause the system to malfunction

^

Check for stored Diagnostic Trouble Codes (DTCs) in the PCM. Refer to Powertrain OBD System Check in Engine Controls.

The PCM will inhibit cruise control:

^

When vehicle speed is less than 40 km/h (25 mph).

^

When PARK, REVERSE, NEUTRAL, or 1st gear is indicated by the Park/Neutral Position Switch,

^

When an over/undercharged battery condition exists.

^

With low engine RPM.

^

With high engine RPM (fuel cut-off). Refer to Powertrain Control Module Description in Engine Controls for additional information.

 

Instrument Panel, Gauges and Warning Indicators > < Cruise Control - (W/Electro Stepper Mtr.) Diagnostics|Page 4296