Tracker 4x2 L4-1.6L VIN 6 (1995)
Cruise Control Switch: Testing and Inspection
Set Coast/Accel/Resume/Cancel Switch
1. Remove turn signal/dimmer switch assembly.
Fig. 14 Set Coast, Accel Resume & Cancel Switch Continuity Test.
Fig. 15 Set Coast, Accel Resume & Cancel Switch Position Test.
2. Using a suitable circuit tester, check continuity between terminals, Fig. 14, at each switch position, Fig. 15.
3. If switch does not function as specified, replace turn signal/dimmer switch assembly.
