Tracker 4x2 L4-1.6L VIN 6 (1995)
Engine Mount: Service and Repair
Fig. 2 Engine Mounting.
LEFT
1. Remove radiator shroud.
2. Raise and support vehicle.
3. Remove skid pan from under vehicle.
4. Remove exhaust pipe to bracket nut.
5. Remove engine mount to engine bolts, Fig. 2.
6. Lower vehicle.
7. Support engine.
8. Remove exhaust bracket bolts and bracket.
9. Remove engine mount to frame bracket bolts.
10. Raise engine slightly and remove engine mount assembly.
11. Remove mount from mount to frame bracket.
12. Reverse procedure to install.
RIGHT
1. Disconnect battery ground cable.
2. Remove radiator shroud.
3. Raise and support vehicle.
4. Remove skid pan from under vehicle.
5. Support engine.
6. Disconnect electrical connections from starter.
7. Remove engine mount to frame bracket bolts, Fig. 2.
8. Remove engine mount to engine bracket bolts.
9. Raise engine slightly and remove engine mount assembly.
10. Remove mount from mount to frame bracket.
11. Reverse procedure to install.
