Tracker 4x2 L4-1.6L VIN 6 (1995)
Turn Signal Switch: Service and Repair
Fig. 1 Steering Column Assembly
1.
Disconnect battery ground cable.
2.
Remove steering wheel, then upper, lower column and steering wheel cover, Fig. 1.
WARNING: Refer to Air Bags and Seat Belts/ Air Bags (Supplemental Restraint Systems)/ Service and Repair/ Air Bag System
Disarming & Arming. See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair
3.
Disconnect turn signal/dimmer switch connector at lead.
4.
Remove turn signal/dimmer switch retaining screws, then turn signal/dimmer switch.
5.
Reverse procedure to install.
