Tracker 4x2 L4-1.6L VIN 6 (1995)
EGR Temperature Sensor: Service and Repair
EXHAUST GAS RECIRCULATION TEMPERATURE SENSOR REPLACEMENT
REMOVE OR DISCONNECT
1. Negative (-) battery cable.
2. Exhaust Gas Recirculation Temperature (EGRT) sensor electrical connector.
3. EGRT sensor from EGR valve.
INSTALL OR CONNECT
1
EGRT sensor to EGR valve. Tighten EGRT sensor to 10-20 Nm (7.5-14.0 lb ft).
2. EGRT sensor electrical connector.
3. Negative (-) battery cable. Tighten Negative (-) battery cable-to-negative (-) battery terminal retainer to 15 Nm (11 lb ft).
