Tracker 4x2 L4-1.6L VIN 6 (1995)
Ball Joint: Testing and Inspection
1. Raise and support vehicle so that suspension is allowed to hang free.
2. Grasp wheel and tire assembly at top and bottom, then rock top of wheel and tire assembly inward and outward.
3. While rocking wheel and tire assembly, observe movement between steering knuckle and control arm. If any horizontal movement is present,
replace ball joint.
4. If ball joint is disconnected from steering knuckle, use finger to try to twist ball joint in its socket. If ball joint can be twisted in its socket, replace
ball joint.
