Tracker 4x2 L4-1.6L VIN 6 (1995)
Differential Axle Housing: Service and Repair
Front Axle
1. Raise and support vehicle.
2. Disconnect breather hose.
3. Disconnect and support propeller shaft.
Fig. 3 Mounting Brackets (Disconnecting).
4. Remove four left mounting bracket bolts and three driveshaft flange bolts, Fig. 3.
5. Support differential and remove bolts from crossmember and right end of housing.
6. Disconnect right side driveshaft joint and remove housing assembly using suitable pry bars.
7. Reverse procedure to install, noting the following:
a. Torque all mounting bracket bolts to 37 ft.lbs.
b. Torque front driveshaft flange bolts to 37 ft. lbs.
c. Torque propeller shaft flange bolts to 41 ft.lbs.
