Tracker 4x2 L4-1590cc 1.6L (1991)
Compressor Clutch: Service and Repair
The following instructions for removal of the magnetic clutch were written (and the art drawn) as a bench procedure, with the compressor assembly
removed from the vehicle.
Remove or Disconnect
Tool Required:
J 34878 Pressure Plate Remover
1. Pressure plate nut.
2. Pressure plate, using a J 34878 pressure plate remover.
3. Drive clutch snap ring and shim, using the appropriate snap ring pliers.
4. Drive clutch. Tap off with plastic hammer if necessary.