Tracker 4x2 L4-1590cc 1.6L (1991)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
REMOVAL:
1.
Disconnect negative battery cable, and drain cooling system.
2.
Disconnect connector from Coolant Temperature Sensor.
3.
Remove Coolant Temperature Sensor from manifold.
INSTALLATION:
1.
Clean mating surfaces of intake manifold and Coolant Temperature Sensor.
2.
Use a new gasket.
3.
Install Coolant Temperature Sensor in intake manifold.
4.
Tighten to 35-55 N-m (25.5-39.5 lb. ft).
5.
Connect the connector securely.
6.
Refill cooling system.
7.
Connect negative battery cable.