geo Workshop Repair Guides

Geo Workshop Service and Repair Manuals

Radio, Stereo, and Compact Disc|Speaker > < Diagram Information and Instructions|Page 5920
Page 1
background image

Radio/Stereo: Service and Repair
Radio Replacement

1. Disconnect battery ground cable.
2. Remove heater control knobs and face plate from instrument panel center trim bezel.
3. Twist off heater control unit face plate illumination bulb.
4. Remove ashtray from track.
5. Remove attaching screws and instrument panel center trim bezel.
6. Remove attaching screws from radio mounting bracket.
7. Pull radio out of instrument panel, then disconnect electrical and antenna connections.
8. Remove radio from vehicle, then remove screws and side mounting brackets from radio.
9. Reverse procedure to install.

Radio, Stereo, and Compact Disc|Speaker > < Diagram Information and Instructions|Page 5920