Tracker 4x4 L4-1.6L VIN 6 (1995)
5. Remove skid plate and lower radiator shroud, then lower vehicle.
6. Lower vehicle, then on models equipped with A/C remove attaching bolts and reposition A/C suction line to allow access for radiator shroud
removal.
7. Disconnect upper radiator hose, then remove radiator shroud.
8. Remove crankshaft pulley bolts, Fig. 39, then the crankshaft pulley from the crankshaft. Removal of center pulley bolt is not required.
9. Remove oil pressure sending unit wire conduit from timing belt cover.
10. Remove timing belt cover from engine, Fig. 40.
11. Remove seal from timing belt outer cover.
12. Reverse procedure to install.
