Acadia FWD V6-3.6L (2007)
13. Continue extracting the mount until it is fully removed from the suspension crossmember.
Installation Procedure
1. Clean the frame mount opening.
2. Apply a thin coat of rubber lubricant GM P/N 1051717 (Canadian P/N 5728223), or equivalent to the inside of the suspension crossmember mount
opening.
3. Apply a thin coat of rubber lubricant GM P/N 1051717 (Canadian P/N 5728223), or equivalent to the suspension crossmember mount.
4. Install clamp J-45725 onto the mount about 1/8 inch from the top of the mount.
