Acadia FWD V6-3.6L (2007)
turned to properly align with the transmission.
12. Snap the drive cable housing into the metal clips on the motor bracket.
13. Install the front driver seat into the vehicle. Refer to the Bucket Seat Replacement procedure in SI.
14. Verify proper operation of the seat.
Parts Information
To obtain the new horizontal motor drive cable, fax the form included in this bulletin to the GM Warranty Parts Center (WPC). Request the WPC # for
the appropriate seat application and configuration.
-
WPC #397 for 6-way power seat (AG1) with metal motor bracket
-
WPC #398 for 8-way memory seat (AG3) with metal motor bracket
-
WPC #569 for 6-way power seat (AG1) with plastic motor bracket
-
WPC #570 for 8-way memory seat (AG3) with plastic motor bracket
Warranty Information
For vehicles repaired under warranty, use table.
