Acadia FWD V6-3.6L (2007)
1. Install new O-rings to the suction hose/pipe.
2. Connect the suction hose/pipe to the TXV tube.
Notice: Refer to Fastener Notice.
3. Install the suction hose/pipe to TXV nut (1).
Tighten the bolt to 9 N.m (80 lb in).
4. Connect the suction hose/pipe to the A/C compressor.
5. Install the suction hose/pipe bolt to the A/C compressor.
Tighten the bolt to 9 N.m (80 lb in).
6. Install the suction hose/pipe bracket and secure with nut (1).
7. Install the right front engine splash shield.
8. Install the right front wheel house liner.