C 1500 Truck 2WD V6-4.3L VIN W (2001)
Important:
The optic cable must not be bent with a radius less than 25 mm (1 in).
12.5. Cars with brackets for e.g. an amplifier: Fit the cable tie (11 900 515) to the wiring harness approx. 100 mm (4 in) from H2-9, fit the cable
tie (H) to the bracket. Gather the optic cable in a gentle loop (I) and then place the loop behind the bracket.
Important:
The optic cable must not be bent with a radius less than 25 mm (1 in).
12.6. Cars without brackets for e.g. an amplifier: Gather the optic cable in a gentle loop (J) and secure with cable tie.
13.
CV: Fit the left-hand, rear side hatch trim in accordance with WIS - 8. Body - Interior equipment - Adjustment/Replacement.
14.
Fit the ground cable to the battery's negative terminal.
15.
Carry out procedures after disconnecting the battery, see WIS - 3. Electrical System - Charging system - Adjustment/Replacement.
Important:
Follow Tech 2(R) on-screen instructions.
16.
Add ECU ICM, choose without OnStar(R). See WIS-General-Tech 2(R) - Description and Operation - Add/Remove.
2000-2004 Saab 9-5
2000-2004 Saab 9-5