C 1500 Truck 2WD V6-4.3L VIN W (2001)
![background image](/gmc/c_1500_truck_2wd/v6-4.3l_vin_w/Page-2241002.png)
1. Install the master cylinder reservoir.
2. Bench bleed the master cylinder.
3. Install the master cylinder.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the master cylinder mounting nuts.
^
Tighten the nuts to 36 Nm (27 ft. lbs.).
5. Remove the pipe caps.
6. Connect the brake pipes.
^
Tighten the fittings to 25 Nm (18 ft. lbs.).
7. Connect the electrical connection at the brake fluid level sensor.
8. Bleed the brakes.
9. Release the parking brake.