gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Sensors and Switches - Cooling System > < Radiator Hose|Inlet|Page 4352
Page 4
background image

Notice:  Refer to Fastener Notice in Service Precautions.

5. Install the resonator retaining wing nut.

^

Tighten the resonator wing nut to 3 Nm (27 inch lbs.).

6. Connect the PCV hose to the air cleaner outlet duct.

7. Connect the MAF/IAT sensor assembly harness connector.
8. Fill the cooling system. 
9. Inspect the cooling system for leaks.

Sensors and Switches - Cooling System > < Radiator Hose|Inlet|Page 4352