C 1500 Truck 2WD V6-4.3L VIN W (2001)
Notice: All camshaft journals are the same diameter,so care must be used in removing or installing the camshaft to avoid damage to the camshaft
bearings.
3. Use the bolts as a handle in order to install the engine camshaft.
4. Remove the 3 bolts from the front of the engine camshaft.
Notice: Refer to Fastener Notice in Service Precautions.
5. If reusing the fasteners, apply threadlock GM P/N 12345382 or equivalent to the threads of the camshaft retainer bolts.
6. Install the camshaft retainer and bolts.
^
Tighten the camshaft retainer bolts to 12 Nm (106 inch lbs.).
7. Install the balance shaft drive gear.
8. Install the timing chain and camshaft sprocket.
9. Install the valve lifters.
10. Install the A/C condenser.
11. Install the radiator.
12. Fill the engine cooling system.
13. Recharge the air conditioning system.
14. Connect the battery negative cable.
